
Key Sequence Display Visual
4.2.2.E. Sleep
sleep 15
sleep 30
sleep 60
2’’
The sleep function shuts the Control Unit off after a predefined time entered at power on. The
user can program the time. Once the pre-set time has elapsed, the Control Unit will
automatically power off. If the Control Unit is switched off manually before the end of the pre-
set time, the sleep function will be cleared.
80
m
m
m
m
M 98.60
M 99.40
F 102.3
M-1
m 102.3
M-3
F 99.40
CH 1
CH 2
CH FM
m
2’’
m
STEREO
MONO
4.2.2.D. Operation & f the Control Unit’s
Local FM Tuner
Store Station Pre-sets o
428A4
42992
428A1
Press key for channel selection.
Select Local FM tuner with +/- keys.
To enter the memory pre-set selection mode, press again. The display
will show the frequency of the current station. We can scroll through the
different pre-set stations in memory with the +/- keys. Keeping these keys
pressed down, the tuner will automatically search the next station (the
sensitivity level is as programmed in 4.2.4.B).
To enter the store to memory mode, press the key for 2 seconds. The
+/- keys tune the frequency
If the stereo signal quality is not satisfactory you can overrule and select
mono mode manually, which is less demanding, by pressing again. To
switch between stereo and forced mono modes, use the +/- keys.
The pre-set memory number will appear flashing. By default, the Control
Unit offers the first available memory position, which may be changed
using the +/- keys.
To confirm it has been stored, press FM again.
m
m
m
m
The Program
Menu has the
option to
search and
automatically
store stations
at the optimal
reception level
(see 4.2.4.B)
control
unit ON
CC-1023ENG-10
Comentarios a estos manuales