EisSound 400 Series Manual de instalación descargar pdf (Pagina 83)

100

To talk, press the key and hold it down throughout the

transmission. If the operation could not be initiated for any

reason, a message will appear on the display. If the

communication takes place, the name of the zone called will

be displayed.

Access the call mode by pressing the key 2”

and select the individual identification call mode

Press the key again to active the mode

Use the +,- keys to select the zone number to which you wish to

make the call

Select the zone that

will receive the call

4.2.3.B. Calls To An Individual Zone

Key Sequence Display Visual

addres

adr 01

adr 06

calls

2’’

ZONe 01

ZONE 06

transmitting

ZONe 06

ZONA 01

The hands-free auto-response mode settings

are programmed in the Programming Menu (see

4.2.4.E) and the Installation Menu (see 4.2.5.J and

4.2.5.K).

beep!!

An intercom call to an individual zone is an intercommunication call between two zones in

half-duplex setup with hands-free response. A Control Unit is identified by its zone

identification number (see 4.2.5.A.)

The intercom call will be

transmitted while the key is

held down (the maximum

duration is 1').

The Control Unit receiving the

message displays the name of the

zone transmitting the intercom call.

Transmit the intercom call

information on the zone

receiving the intercom call

information on the zone

transmitting the intercom call

transmitting

intercom call

When the key is released the Control Unit goes into hands-

free auto response mode and a response to the intercom call is

received. The person who had initiated the conversation can

then hear the response from the other party.

This mode remains active as long as the person is talking

(auto-response sensitivity and silence time settings can be

programmed).

The zone receiving the intercom call opens its microphone

and a specific beep signal is sent through the loudspeakers to

signal that the microphone is capturing the sound from that

zone (this avoids unauthorized hearing of intercom calls). The

auto-response will be activated as long as the voice detector

does not detect a silent period longer than the time

programmed. In any case, the maximum duration is 1’.

Receiving the response

Hands-free auto-response

CC-1023ENG-10

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 99 100

Comentarios a estos manuales

Sin comentarios

EisSound 400 Series Manual de instalación Pagina 83

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad EisSound 400 Series